LiPo SHIM
The tiny little LiPo/LiIon power supply shim for all versions of the Raspberry Pi!
Features
0.8mm thick PCB
Shaped to sit as low as possible on the Raspberry Pi
2-pole JST connector ideal for most LiPo/LiIon batteries
Power and low battery LED indicators
Supplies up to 1.5A continuous current (15uA quiescent current)
Low battery warning at 3.4V (asserts GPIO #4 low)
Automatic shutdown at 3.0V to protect your battery
VBAT+, GND, and EN pins available to break out
2x6 0.1" female header (optional, for non permanent installation)
Includes rubber foot to space LiPo SHIM away from your Raspberry Pi
LiPo SHIM pinout
Compatible with Raspberry Pi 3, 2, B+, A+, Zero, and Zero W
Requires soldering
Software
One-line installer that will initiate a clean shutdown when the low battery warning is triggered and GPIO #4 is pulled low. More details are available here in the GitHub repository.
Notes
This is not a charger. You will need a separate charger to keep your LiPo/LiIon batteries topped up!
Related Products
Raspberry Pi Zero W
The Raspberry Pi Zero W extends the Pi Zero family. Launched at the end of February 2017, the Pi Zer..
₱1,500.00 ₱1,999.00
MP2636 Power Booster & Charger Module
The Monolithic Power Systems (MPS) MP2636 is highly-integrated, flexible switch-mode battery charger..
₱1,042.00
Tags: LiPo SHIM